The technology of water transfer print

Film printing:

in the polymer film printed on a variety of different patterns;

Spraying primer:

many water transfer processing material coated with a layer of adhesive, if you want to transfer different patterns, use different background color;

Membrane extension:

let the membrane lay flat on the water surface, and wait for the membrane to stretch and level off;

Activation:

the use of a special solvent (activator) to activate the transfer film pattern to the state of ink. Depending on the thickness of printing ink, determine the time of spraying activator. The thicker the ink layer, the activator can be sprayed in advance when the water transfer film has not been completely dissolved, so that the ink activation time is longer, and the general operation of the solution of 1 minutes and 30 seconds or so can be sprayed activator, until the film into a mirror and flat expansion can be on the film, transfer.

Before the film, depending on the shape or texture of the processed material, the water Angle should be selected to facilitate air discharge.

After the film, not immediately picked up, should be shaken in the water for 2 to 3 seconds, increase the time to ask the way to bite the processed objects.

Transfer printing:

the use of water pressure, water transfer processing after the activation of the pattern printed on the printed material;

Washing:

to wash the remaining impurities of the printed workpiece with water;

Drying:

the water transfer printing process is printed workpiece drying, temperature from the point of view of the melting point of material and plain;

Spray top coat:

spray transparent protective paint to protect the surface of the printed object;

Drying: 

to spray the surface of the object dry.Spray a layer of transparent varnish on the surface of baked goods, and dry it for 12h, so that the surface and decoration are permanently combined together